Be one of the first to build our 16 gauge sheet, metal brake and roller! I'll be posting a video step by step instructions. I'm so excited for people around the world to have this capability in a small space!
This is a very complete and comprehensive kit! I will be posting a video again assembling another complete Bender using this kit as the step-by-step guide for you to build yours. 
3/4" CR RB  2 x 6".      Brake arms 
   ".       ".        2 x 3".     Pivot shaft
   ".        ".       2 x 2"      brake hinge 
1" .120 wall DOM 2 x 18" 
1 1/4" DOM .240" wall 2  x 2.5"
1 1/4"  "              "                4 x  1" 
1/2 " spacer DOM .240" wall 2  x 7/16"
Hardware 
Center pipe Pivot bolts 1/2" GR 8 coarse x 1 1/2"      x2
Blade up down bolts 1/2" GR 8 coarse x 3"   x 2 
Bearing shaft bolts 5/8" GR 8 coarse x 3".        x2
End plate bolts 3/8" GR 8 coarse x 1".     x8
Bearing flange bolts GR 8 coarse x 1 1/4"    x4 
Bearing flange nuts 3/8" GR 8 coarse   x 4
3/8" GR 8 tension washers      x 16 (bearing flanges 2 per bolt. And 4 per side of pipe anvil)
Brake blade adjuster nuts 3/8" x 1 1/4".  x 2 
1/2" Raw GR 5 coarse nuts.      x 12 
3/8" Raw GR 5 coarse nuts.      x 26 
5/8" Raw GR 5 coarse nuts.      x 2 
Plates we supply 
10g 
Tear drops end plates x 4 
Roller plates            x 2   
Caster plates          x 4 
1/4" 
Frame pivot (tool side) x 2 
Top frame tab         x 2 
Top frame cap        x 2 
3 pc Angle ends.   Pivot gusset adjuster  x 2 
Blade up down nut tab    x 2 
Adjuster tab            x 2
Square hole gusset plates.    x 4
Roller end caps     x 2 
 
Misc parts 
Pin for locking the brake 
Springs x 2
5/8" flange bearings x 2
What you need! 
Bender 
36"    3"HR FB 
36"     3"x5" 3/8" Angle
40".    4"x6" 3/8"  Angle 
40".    4" x 1/2" FB (preferably cold rolled)
Roller 
2" .120 erw 6.5 ft 
Sched 40 pipe     8" x 36" 
                                     4" x 36 3/8"
                                     2" x 36 3/4"
Frame 2 x 2 .120" sq tube
25 1/4" x 4 
13" x 2 
42 x 1 
15' x2 
3 1/2" x 2 
37" x 1